LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Heated Oxygen Sensor >> Removal

Heated Oxygen Sensor: Removal

  1. REMOVE OXYGEN SENSOR (for Bank 1) 
    1. Disconnect the oxygen sensor connector and clamp.
    2. Using SST, remove the oxygen sensor from the front No. 3 exhaust pipe sub-assembly.

      SST 09224-00010 

      NOTE: Do not damage the oxygen sensor.
      Fig 1: Removing Oxygen Sensor (For Bank 1)
      G05625773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE OXYGEN SENSOR (for Bank 2) 
    1. Disconnect the oxygen sensor connector.
    2. Using SST, remove the oxygen sensor from the front exhaust pipe sub-assembly.

      SST 09224-00010 

      NOTE: Do not damage the oxygen sensor.
      Fig 2: Removing Oxygen Sensor (For Bank 2)
      G05625774Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals