LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control System (Hybrid) >> Crankshaft Position Sensor >> Inspection

Crankshaft Position Sensor: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION

      Tester Connection Condition Specified Condition
      1-2 Cold 1630 to 2740 Ω
      Hot 2065 to 3225 Ω

      HINT:

      • "Cold" and "Hot" refer to the temperature of the coils themselves.
      • "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).

      If the resistance is not as specified, replace the sensor.

      Fig 1: Identifying Crankshaft Position Sensor
      G05200247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals