Air Fuel Ratio Sensor: Inspection

INSPECT AIR FUEL RATIO SENSOR

Measure the resistance according to the value (s) in the table below.

Standard resistance

Bank 1

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Condition	Specified Condition
1 (HA1A) - 2 (+B)	20°C (68°F)	1.8 to 3.4 Ω
1 (HA1A) - 4 (A1A-)	Always	10 kΩ or higher

Bank 2

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Condition	Specified Condition
1 (HA2A) - 2 (+B)	20°C (68°F)	1.8 to 3.4 Ω
1 (HA2A) - 4 (A2A-)	Always	10 kΩ or higher

If the result is not as specified, replace the air fuel ratio sensor.

Fig 1: Identifying Air Fuel Ratio Sensor Connector Terminals