LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Engine Control (Service Information)) >> Engine Coolant Temperature Sensor >> Removal >> Removal

Engine Coolant Temperature Sensor: Removal: Removal

WARNING: This page is about a different car, the 2009 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 2
  2. REMOVE COOL AIR INTAKE DUCT SEAL  . Refer to REMOVAL - Step 3
  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  See step  4
  4. REMOVE ENGINE UNDER COVER 
  5. DRAIN ENGINE COOLANT  . Refer to REPLACEMENT - Step 3
  6. REMOVE E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the E.F.I. engine coolant temperature sensor connector.
      Fig 1: Locating EFI Engine Coolant Temperature Sensor Connector
      GTY148775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the E.F.I. engine coolant temperature sensor.
    3. Remove the gasket from the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals