LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Power Outlet Socket >> Removal

Power Outlet Socket: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)  (See REMOVAL )
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)  (See REMOVAL )
  5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE BOX BOTTOM MAT  (See REMOVAL )
  7. REMOVE CONSOLE BOX ASSEMBLY REAR  (See REMOVAL )
  8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE POWER OUTLET SOCKET 
    1. Using a screwdriver, disengage the claw, then turn the power outlet socket counterclockwise and push the power outlet socket half way out.
      Fig 1: Disengaging Claw Using Screwdriver
      G05114248Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
      Fig 2: Aligning Protrusion Of Power Outlet Socket With Cutout Of Power Outlet Socket Cover
      G05114249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE POWER OUTLET SOCKET COVER 
    1. Disengage the 2 claws and remove the power outlet socket cover.
      Fig 3: Identifying Power Outlet Socket Cover Claws
      G05114250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals