LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Inverter Main Switch >> Removal

Inverter Main Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE PARKING BRAKE HOLE COVER  (See REMOVAL )
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)  (See REMOVAL )
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)  (See REMOVAL )
  5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE BOX BOTTOM MAT  (See REMOVAL )
  7. REMOVE CONSOLE BOX ASSEMBLY REAR  (See REMOVAL )
  8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE INVERTER MAIN SWITCH 
    1. Disengage the 2 clips and remove the inverter main switch.
      Fig 1: Identifying Clips For Inverter Main Switch
      G05114267Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE INVERTER MAIN SWITCH BULB 
    1. Turn the inverter main switch bulb, in the direction indicated by the arrow in the figure below, to remove it.
      Fig 2: Identifying Inverter Main Switch Bulb
      G05114268Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals