LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Part Time >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle >> Front Axle Hub Bolt >> Installation

Front Axle Hub Bolt: Installation

  1. INSTALL FRONT AXLE HUB BOLT 
    1. Install the washer and the nut onto a new hub bolt.
    2. Using a screwdriver or the equivalent to hold the axle hub, install the hub bolt by tightening the nut.
      3. Fig 1: Identifying Front Axle Hub Bolt With Screwdriver
      G05112033Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT DISC  (See INSTALLATION )
  3. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY  (See INSTALLATION  )
  4. INSTALL FRONT WHEEL 

    Torque: 112 N*m (1,137 kgf*cm, 82 ft.*lbf) 

  5. FILL RESERVOIR WITH BRAKE FLUID  (See BRAKE FLUID )
  6. BLEED BRAKE LINE  (See BRAKE FLUID )
  7. CHECK FLUID LEVEL IN RESERVOIR  (See BLEEDING )
  8. CHECK FOR BRAKE FLUID LEAKAGE 
scientia non olet · About LEMON Manuals