LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Clock >> Removal

Power Outlets: Clock: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE INSTRUMENT PANEL GARNISH LH  (See REMOVAL )
  3. REMOVE INSTRUMENT PANEL GARNISH RH  (See REMOVAL )
  4. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY  (See REMOVAL )
  5. REMOVE RADIO RECEIVER ASSEMBLY  (See REMOVAL )
  6. REMOVE CLOCK ASSEMBLY 
    1. Disengage the 2 claws and remove the clock assembly.

      HINT:

      Pull the clock assembly out in the direction shown in the figure below to remove it.

      Fig 1: Identifying Clock Assembly Claws
      G05114244Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals