LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Outlets >> Clock System >> Terminals Of Ecu

Terminals Of Ecu

  1. CLOCK ASSEMBLY 
    Fig 1: Identifying F2 Connector Terminals
    G05114242Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the clock assembly connector.
    2. Measure the voltage of the wire harness side connector.

      Standard voltage: 

      STANDARD VOLTAGE SPECIFICATIONS

      Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
      ILL+ (F2-3) - Body ground G - Body ground Illumination Signal Combination switch OFF Below 1 V
      Combination switch Head 11. to 14 V
      ACC (F2-4) - Body ground GR - Body ground Ignition Switch Signal Ignition switch OFF Below 1 V
      Ignition switch ON . 11 to 14 V
      E (F2-2) - Body ground W-B - Body ground Ground Always Below 1 V
      B (F2-1) - Body ground R - Body ground Battery Always 11 to 14 V

      If the result is not as specified, there may be a malfunction on the wire harness side.

scientia non olet · About LEMON Manuals