LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> OEM System Circuits >> Cruise Control System >> System Outline >> Auto Cancel

Auto Cancel

  1. The set vehicle speed will be erased from memory and the cruise control will be cancelled in the situations outlined below. Until the ON-OFF SW is turned ON again, the cruise operation indicator blinks and the cruise control can not be activated.

    * When the stop lamp SW has been disconnected or short-circuited.

    * When the vehicle speed signal is abnormal.

    * When the electronic throttle parts are abnormal.

  2. The set vehicle speed will be erased from memory and the cruise control will be cancelled in the situations outlined below. Until the ON-OFF SW is turned ON again, the cruise operation indicator blinks and the cruise control can not be activated until the ignition SW has been turned OFF and then ON again.

    * When the stop lamp SW input circuit is abnormal.

    * When the cancel circuit is abnormal.

  3. The set vehicle speed will be erased from memory and the cruise control will be cancelled in the situation outlined below. When the vehicle speed drops below the set speed minus 16 km/h (10 mph). (Set speed erased)
  4. The cruise control will be cancelled in the situation outlined below.

    * When the vehicle speed falls below than the low speed limit. (Set speed retained)