Rear Axle Beam: Disassembly

REMOVE REAR AXLE CARRIER BUSH LH
1. Make matchmarks on the 2 notches of the bushing and axle beam.
2. Using a chisel and a hammer, bend the 2 portions of the bushing rib.
  HINT:
  
  Bend the bushing rib until the claw of SST can be hung.
3. Using SST, remove the bushing from the axle beam.
  SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04020, 09955-04051, 09957-04010, 09958-04011), 09950-60010 (09951-00630)
  
  NOTE: If the rear axle beam assembly has been scratched, apply the paint.
REMOVE REAR AXLE CARRIER BUSH RH
1. Remove the RH side by the same procedures with the LH side.
  
  Fig 1: Removing Bushing From Axle Beam
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002