LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Audio System & Visual System) >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE NO. 2 LOWER STEERING WHEEL COVER (See  REMOVAL  ) 
  3. REMOVE NO. 3 LOWER STEERING WHEEL COVER (See  REMOVAL  ) 
  4. REMOVE STEERING PAD (See  REMOVAL  ) 
  5. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the pad switch connector from the spiral cable.
    2. Disengage the clamp and remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch.
      Fig 1: Identifying Steering Pad Switch Pin And Clamp
      G05132449Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the clamp and remove the screw.
    5. Disengage the 2 pins and remove the steering pad switch assembly.
      Fig 2: Locating Steering Pad Switch Pin
      G05132450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002