LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Control System (3MZ-FE)) >> ECM >> Removal

Section 24 (Engine Control System (3MZ-FE)): ECM: Removal

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT BATTERY NEGATIVE TERMINAL 
  2. REMOVE FRONT DOOR SCUFF PLATE RH (for Coupe) (See  REMOVAL  ) 
  3. REMOVE FRONT DOOR SCUFF PLATE RH (See  REMOVAL  ) 
  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See  REMOVAL  ) 
  5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See  REMOVAL  ) 
  6. REMOVE NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH (See  REMOVAL  ) 
  8. REMOVE ECM 
    1. Remove the 2 wire harness clamps.
    2. Disconnect the 5 ECM connectors.
    3. Remove the 2 nuts and ECM.
      Fig 1: Locating ECM Connectors
      G05128342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE ECM BRACKET 
    1. Remove the 2 screws and ECM bracket.
      Fig 2: Locating ECM Bracket Screws
      G05128343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE ECM BRACKET NO.2 
    1. Remove the 2 screws and ECM bracket.
      Fig 3: Locating ECM Bracket No.2 Screws
      G05128344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals