Data List / Active Test
WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
- DATA LIST
HINT:
Using the intelligent tester DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Read the DATA LIST.
Transponder key ECU assembly
DATA LIST REFERENCEItem Measurement Item/ Display (Range) Normal Condition Diagnostic Note KEY SW Unlock warning switch signal/ ON or OFF OFF: No key is in ignition key cylinder
ON: Key is in ignition key cylinder- IG SW Ignition switch signal/ ON or OFF OFF: Ignition switch OFF or ACC
ON: Ignition switch ON- immobilizer Immobilizer system status/ SET or UNSET UNSET: Ignition switch ON
SET: Without key- RESPONSE Transponder chip data/ NG or OK NG: Data error
OK: Data OK- FRAME Transponder chip data/ NG or OK NG: Data error
OK: Data OK- SERIAL NUMBER Transponder chip data/ NG or OK NG: Data error
OK: Data OK- ENCRYPT CODE Transponder chip data/ NG or OK NG: Data error
OK: Data OK- STATUS Transponder chip data/ NG or OK NG: Data error
OK: Data OK- BCC Transponder chip signal/ NG or OK NG: Incorrect data sending
OK: Correct data sending- SUB KEY Sub-key code signal/ NOMATCH or MATCH NOMATCH: Unmatched sub-key code is sent
MATCH: Sub-key code is sent- MASTER KEY Master key code signal/ NOMATCH or MATCH NOMATCH: Unmatched master key code is sent
MATCH: Master key code is sent- REGIST SUB CODE Number of registered sub-key/ min. 0, max. 15 Number of registered sub-keys - REGIST MAS CODE Number of registered master key/ min. 0, max. 15 Number of registered master keys - REG CODE SPACE Memory space for key codes registration/ NOT FUL or FULL NOT FUL: Possible to register more key codes
FULL: Cannot register any more key codes- ANTENNA COIL Antenna coil condition/ NORMAL or FAIL NORMAL: Antenna coil is normal
FAIL: Antenna coil is malfunctioning-
- ACTIVE TEST
HINT:
Performing the intelligent tester ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.