How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use this procedure to troubleshoot the key reminder warning system.

VEHICLE BROUGHT TO WORKSHOP
CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
INSPECT BATTERY VOLTAGE
1. Check the battery voltage.
  Voltage:
  
  11 to 14 V
  
  If the voltage is below 11V, recharge the battery before proceeding.
PROBLEM SYMPTOMS TABLE
1. If the fault is not listed on the problem symptoms table, proceed to A.
2. If the fault is listed on the problem symptoms table, proceed to B.
B: Go to step 5

A: Go to next step
OVERALL ANALYSIS AND TROUBLESHOOTING
1. See ON-VEHICLE INSPECTION
2. See TERMINALS OF ECU
ADJUST, REPAIR OR REPLACE
CONFIRMATION TEST
END