LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Yaw Rate And Acceleration Sensor >> Removal

Yaw Rate And Acceleration Sensor: Removal

  1. REMOVE FRONT SEAT ASSEMBLY LH  (See REMOVAL )
  2. REMOVE YAW RATE AND ACCELERATION SENSOR BRACKET 
    1. Remove the bolt and yaw rate and acceleration sensor bracket.
      Fig 1: Identifying Yaw Rate And Acceleration Sensor Bracket Bolt
      G05194997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE YAW RATE AND ACCELERATION SENSOR ASSEMBLY 
    1. Disconnect the connector from the yaw rate and acceleration sensor assembly.
    2. Remove the 2 bolts and yaw rate and acceleration sensor assembly.
      NOTE: Do not remove the installation nuts.
      Fig 2: Identifying Yaw Rate And Acceleration Sensor Assembly Bolts
      G05194998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals