LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Meter) >> Combination Meter >> Removal

Combination Meter: Removal

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL (  REMOVAL  ) 
  2. REMOVE INSTRUMENT PANEL FINISH PLATE 
  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (  REMOVAL  ) 
  4. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (  REMOVAL  ) 
  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (  REMOVAL  ) 
  6. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 3 screws.
    2. Pull out the combination meter assembly, then disconnect the connectors.
      Fig 1: Identifying Combination Meter Assembly With Screws
      G05132308Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE COMBINATION METER GLASS 
    1. Disengage the 8 claws and remove the combination meter glass.
    Fig 2: Identifying Claws On Combination Meter Glass
    G05132309Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals