LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla LE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Service Specifications) >> 3MZ-FE Exhaust System >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2007 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
3MZ-FE EXHAUST - TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
Exhaust pipe assembly center x Exhaust pipe assembly tail 56 571 41
Exhaust pipe assembly front x Exhaust manifold RH 62 632 46
Exhaust pipe assembly front x Exhaust manifold converter No.2 62 632 46
Exhaust pipe assembly front x Exhaust pipe assembly center 56 571 41
Exhaust pipe No.1 support bracket x Body 33 337 24
Floor panel brace rear x Body 19.5 199 14
Front exhaust pipe No.1 support bracket x Body 33 337 24
Rear exhaust pipe No.1 support bracket x Body 33 337 24
Exhaust pip support No.4 x Body 33 337 24
Exhaust pipe No.4 support bracket sub-assembly x Body 39 398 29
Exhaust pipe No.4 support bracket sub-assembly x Body 22 224 16
Heated oxygen sensor (Bank 1 Sensor 2) x Exhaust pipe assembly front 44 449 32
Heated oxygen sensor (Bank 2 Sensor 2) x Exhaust pipe assembly front 44 449 32
Front floor heat insulator No.1 x Body 4.9 50 43 in.*lbf
Parking brake cable heat insulator x Body 5.4 55 48 in.*lbf
Tank protector lower center x Body 5.4 55 48 in.*lbf
Main muffler heat insulator x Body 5.9 60 52 in.*lbf