LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla CE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Intake (3MZ-FE)) >> Intake Air Control System >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT INTAKE AIR CONTROL SYSTEM 
    1. Using a 3-way connector, connect vacuum gauge to the actuator hose.
    2. Connect the intelligent tester to the DLC3.
    3. Start the engine.
    4. On the intelligent tester, enter the ACTIVE TEST mode.
      Fig 1: Identifying Vacuum Gauge
      G05134606Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard 

      INTAKE AIR CONTROL SYSTEM

      Switch Condition Switch Condition
      VSV ON Approx. 27.6 kPa (200 mmHg, 7.9 in.Hg)
      VSV OFF 0 kPa (0 mmHg, 0 in.Hg)
scientia non olet · About LEMON Manuals