LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Corolla CE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Starting System (3MZ-FE)) >> Starting System >> Inspection

Starting System: Inspection

WARNING: This page is about a different car, the 2008 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT STARTER RELAY ASSEMBLY 
    1. Remove the ST relay from the engine room R/B.
    2. Check the resistance of the relay.

      Resistance 

      STARTER RELAY ASSEMBLY RESISTANCE SPECIFICATION

      Tester Connection Specified Condition
      3-5 10 kΩ or higher
      3-5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: Checking Resistance Of Starter Relay
      G05237222Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals