Abs Main Relay: Inspection
WARNING: This page is about a different variant/trim than selected.
- INSPECT ABS MAIN RELAY
- Measure the resistance according to the value(s) in the table below.
Standard resistance
RESISTANCE REFERENCE
| Tester Connection |
Condition |
Specified Condition |
| 3-5 |
Always |
10 kΩ or higher |
| 3-5 |
Apply B+ between terminal is 1 and 2 |
Below 1 Ω |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the value is not as specified, replace the ABS MAIN relay.