LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake (2AZ-FE) >> Intake Air Control Valve >> Inspection

Intake Air Control Valve: Inspection

  1. INSPECT INTAKE AIR CONTROL VALVE 
    1. Inspection procedure when applying voltage between the terminals:
      1. Apply battery voltage between terminals 4 (IAC+) and 5 (IAC-) of the intake air control valve. The actuator should continue to keep the valve open.
      Fig 1: Applying Battery Voltage Between Terminals 4 (IAC+) And 5 (IAC-) Of Intake Air Control Valve
      G04975200Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals