Rear Stabilizer Bar: Installation

1. Install the 2 rear stabilizer bushings to the outside of the stopper ring on the stabilizer bar.
   Fig 1: Identifying Stopper Ring On Stabilizer Bar

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the rear stabilizer bar No. 2 bracket.

1. Install the rear stabilizer bar No. 1 bracket.

1. Install the rear stabilizer bar with the 2 bolts. (LH Side)

   Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

   Fig 2: Locating Rear Stabilizer Bar With Bolts (LH Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rear stabilizer bar with the 2 bolts. (RH Side)

   Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

   Fig 3: Locating Rear Stabilizer Bar With Bolts (RH Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the rear stabilizer link assembly LH with the 2 nuts.

   Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) 

   HINT:

   If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

   Fig 4: Locating Rear Stabilizer Link Assembly LH With Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the rear stabilizer link assembly RH with the 2 nuts.

   Torque: 39 N*m (398 kgf*cm, 29 ft.*lbf) 

   HINT:

   If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

   Fig 5: Locating Rear Stabilizer Link Assembly RH With Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)