LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Camry Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. DISPOSE OF FRONT SHOCK ABSORBER 
    1. Fully extend the shock absorber rod.
    2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.
      CAUTION:
      • Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
      • The gas is colorless, odorless and non-poisonous.
      Fig 1: Identifying Shock Absorber Dimensions
      G04977705Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals