LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Avalon XLS >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior >> Rear Sunshade System >> Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) 

    HINT:

    The following items can be customized.

    NOTE:
    • After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
    • Be sure to record the current settings before customization.
    • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
    1. Connect Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the tester on.
    4. Enter the following menus: Select: Customize Setting /
    5. Select the setting by referring to the table below.

      Others 

      CUSTOMIZE PARAMETERS

      System Default Contents Selection
      R-SHADE DELAY T 0.7s Function to change the time before reverse-linked sunshade lowering function is activated 0s/0.7s/0.9s/1.2s
scientia non olet · About LEMON Manuals