Rear Coil Spring: Installation

INSTALL COIL SPRING REAR LH
1. Install the coil spring rear LH to the rear axle housing.
  HINT:
  
  Fit the lower end of the coil spring into the gap of the spring lower seat
  
  Fig 1: Locating Rear Axle Housing Coil Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT SHOCK ABSORBER ASSEMBLY REAR LH
1. Install the shock absorber, temporarily tighten the bolt.
  
  Fig 2: Identifying Shock Absorber Assembly Rear LH Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
STABILIZE SUSPENSION (See INSTALLATION )
FULLY TIGHTEN SHOCK ABSORBER ASSEMBLY REAR LH
1. Fully tighten the bolt.
  Torque: 98 N*m (1, 000 kgf*cm, 72 ft.*lbf)
  
  Fig 3: Locating Shock Absorber Assembly Rear LH Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT REAR BRAKE TUBE FLEXIBLE HOSE
1. Install the 2 clips with the 2 flexible hoses.
2. Using SST, connect the break tubes to the flexible hose.
  Torque: 15 N*m (155 kgf*cm, 11 ft.*lbf)
  
  SST 09023-00101
  
  Fig 4: Connecting Break Tubes To Flexible Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL RESERVOIR WITH BRAKE FLUID
BLEED BRAKE LINE
CHECK FLUID LEVEL IN RESERVOIR
CHECK BRAKE FLUID LEAKAGE
INSTALL REAR WHEEL
Torque: 112 N*m (1, 137 kgf*cm, 83 ft.*lbf)