Front Stabilizer Bar: Installation

INSTALL STABILIZER BAR FRONT
INSTALL FRONT STABILIZER BAR BUSH NO. 1
1. Install the 2 front stabilizer bar bush No. 1.
  HINT:
  - Install the bushing to the inner side of the bushing stopper on the stabilizer bar.
  - Install the stabilizer bush No. 1 as the protrusion to be on the inner side of the vehicle.
  Fig 1: Identifying Front Stabilizer Bar Bush No. 1
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT STABILIZER BRACKET NO. 2 LH
1. Install the front stabilizer bracket No. 2 LH with the 2 bolts.
  Torque: 40 N*m (410 kgf*cm, 30 ft.*lbf)
  
  Fig 2: Locating Stabilizer Bracket No. 2 LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT STABILIZER BRACKET NO. 1 RH
HINT:

Install the RH side by following the same procedures with the LH side.
INSTALL FRONT STABILIZER LINK ASSEMBLY LH
1. Install the front stabilizer link assembly LH with the 2 nuts.
  HINT:
  
  If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
  
  Fig 3: Locating Stabilizer Link Assembly LH Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT STABILIZER LINK ASSEMBLY RH
HINT:

Install the RH side by following the same procedures with the LH side.
INSTALL FRONT WHEELS
Torque: 112 N*m (1, 140 kgf*cm, 83 ft.*lbf)