LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Electronic Suspension Controls >> Height Control Sensor >> Removal

Height Control Sensor: Removal

  1. REMOVE REAR DISC WHEEL 
  2. REMOVE HEIGHT CONTROL SENSOR SUBASSEMBLY REAR LH 
    1. Disconnect the connector from the height control sensor.
    2. Place matchmarks on the link and bracket.
    3. Remove the nut and disconnect the sensor link.
    4. Remove the 2 bolts and height control sensor.
      Fig 1: Identifying Height Control Sensor Bolts
      G05262366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals