LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (1GR-FE)) >> ECM >> Removal

Section 10 (Engine Control System (1GR-FE)): ECM: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2 
  2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY 
  3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2 
  4. REMOVE ECM 
    1. Disconnect the 5 the ECM connectors from the ECM.
    2. Remove the 3 nuts and the ECM.
    3. Remove the 2 screws and the ECM bracket No. 1 from the ECM.
    4. Remove the 2 screws and the ECM bracket No. 2 from the ECM.
      Fig 1: Identifying ECM Nuts
      G05553867Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals