LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (1GR-FE)) >> Accelerator Pedal Rod >> Removal

Accelerator Pedal Rod: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator pedal connector.
    2. Remove the 2 nuts and the accelerator pedal assembly.
      Fig 1: Identifying Accelerator Pedal Assembly Nuts
      G05553870Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals