LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2UZ-FE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Knock Sensor, Intake Manifold >> Inspection

Knock Sensor, Intake Manifold: Inspection

  1. INSPECT KNOCK SENSOR 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTION SPECIFIED CONDITION TABLE

        Tester Connection Specified Condition
        1 (Ground) - 2 (Output) 120 to 280 kΩ at 20°C (68°F)

        If the result is not as specified, replace the knock sensor.

        Fig 1: Measuring Resistance Between Knock Sensor Terminals
        G04968238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals