Engine Control System (2UZ-FE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation: ECM: Removal
- REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2
(See REMOVAL
)
- REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2
(See REMOVAL
)
- REMOVE ECM
- Disconnect the 5 ECM connector.
- Remove the 3 nuts and ECM.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 2 screws and ECM bracket No. 1 from the ECM.
- Remove the 2 screws and ECM bracket No. 2 from the ECM.