LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2UZ-FE) - System And Circuit Testing, On-Vehicle Inspection, Removal, Inspection And Installation >> Crankshaft Position Sensor >> Installation

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Install crank position sensor with bolt.

      Torque: 6.5 N*m (65 kgf*cm, 58 in.*lbf) 

      Fig 1: Identifying Crankshaft Position Sensor Bolt
      G04968218Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Reconnect the crank position sensor connector.
  2. INSTALL ENGINE UNDER COVER ASSEMBLY REAR 
scientia non olet · About LEMON Manuals