Work Steps

WARNING: This page is about a different car, the 2007 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

When removing instrument panel & pad, cluster lid A, cluster lid C, passenger air bag module assembly and center console assembly, follow steps in the order shown.

CAUTION:

Disconnect both battery cables.
Never tamper with or force air bag lid open, as this may adversely affect air bag performance.
Be careful not to scratch pad and other parts.

INSTRUMENT PANEL COMPONENTS REFERENCE CHART

Parts	Instrument panel and pad	Cluster lid A	Cluster lid C	Passenger air bag module assembly	Center console assembly
INSTRUMENT FINISHER E	[ 1 ]	[ 1 ]	[ 1 ]
CLUSTER LID C	[ 2 ]		[ 2 ]
Audio unit	[ 3 ]
Front pillar garnish (LH/RH)	[ 4 ]	[ 2 ]		[ 1 ]
INSTRUMENT SIDE PANEL (LH/RH)	[ 5 ]	[ 3 ]		[ 2 ]
INSTRUMENT SIDE MASK (LH/RH)	[ 6 ]	[ 4 ]		[ 3 ]
INSTRUMENT SIDE FINISHER	[ 7 ]	[ 5 ]
SIDE VENTILATOR ASSEMBLY (LH)	[ 8 ]	[ 6 ]
STEERING LOCK ESCUTCHEON	[ 9 ]
STEERING COLUMN COVER UPPER	[ 10 ]	[ 7 ]
STEERING COLUMN COVER LOWER	[ 11 ]
CLUSTER LID A	[ 12 ]	[ 8 ]
Combination meter	[ 13 ]
INSTRUMENT LOWER FINISHER	[ 14 ]
GLOVE BOX ASSEMBLY	[ 15 ]
SIDE VENTILATOR ASSEMBLY (RH)	[ 16 ]			[ 4 ]
Passenger air bag module assembly	[ 17 ]			[ 5 ]
INSTRUMENT UPPER MASK	[ 18 ]
INSTRUMENT FINISHER D	[ 19 ]
Controller	[ 20 ]
INSTRUMENT UPPER PANEL ASSEMBLY	[ 21 ]
CONSOLE MASK	[ 22 ]				[ 1 ]
CVT, A/T console finisher	[ 23 ]				[ 2 ]
M/T console boot	[ 23 ]				[ 2 ]
CONSOLE REAR FINISHER	[ 24 ]				[ 3 ]
CONSOLE MASK COVER (WITH ARM REST)	[ 25 ]				[ 4 ]
REAR CUP HOLDER (WITHOUT ARM REST)	[ 25 ]				[ 4 ]
CONSOLE BODY ASSEMBLY	[ 26 ]				[ 5 ]
INSTRUMENT LOWER COVER (LH/RH)	[ 27 ]				[ 6 ]
CENTER CONSOLE ASSEMBLY	[ 28 ]				[ 7 ]
FUSE BLOCK LID	[ 29 ]
Lighting and turn signal switch	[ 30 ]
Wiper & washer switch	[ 31 ]
INSTRUMENT PANEL & PAD	[ 32 ]

[ ]: Number indicates step in removal procedures.