LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tundra Base, 5.7 V, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3UR-FE) - System Testing, Removal & Installation >> Accelerator Pedal >> Installation

Accelerator Pedal: Installation

  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY 
    NOTE:
    • Avoid physical shocks to the accelerator pedal rod assembly.
    • Do not disassemble the accelerator pedal rod assembly.
    1. Install the accelerator pedal rod with the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
      Fig 1: Locating Accelerator Pedal Position Sensor Connector
      G05150024Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals