LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tundra Base, 4.7 T, RWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Front Seat Inner Belt Assembly >> Installation

Front Seat Inner Belt Assembly: Installation

  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY 
    1. Install the front seat inner belt with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE: Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.
      Fig 1: Identifying Front Seat Inner Belt Nut
      G05160426Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Driver Side:
      1. Connect the 2 connectors and attach the 4 clamps.
    3. Passenger Side:

      Connect the connector and attach the clamp.

  2. INSTALL INNER FRONT SEAT CUSHION SHIELD (for Manual Seat)  (See REASSEMBLY )
  3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat) 
    1. Install the front seat (see INSTALLATION ).
  4. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat) 
    1. Install the front seat (see INSTALLATION ).
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
scientia non olet · About LEMON Manuals