LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tundra Base, 4.0 U >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (1GR-FE) >> Ignition Switch >> Installation

Ignition Switch: Installation

  1. INSTALL IGNITION SWITCH ASSEMBLY  (See REASSEMBLY )
  2. INSTALL UPPER STEERING COLUMN WITH SWITCH CLAMP ASSEMBLY (for Manual Tilt)  (See REASSEMBLY )
  3. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual Tilt and Telescopic)  (See REASSEMBLY )
  4. INSTALL STEERING COLUMN ASSEMBLY 
    1. for Manual Tilt:

      Install the steering column (See INSTALLATION ).

    2. for Manual Tilt and Telescopic:

      Install the steering column (see INSTALLATION ).

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: Some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
scientia non olet · About LEMON Manuals