Data List / Active Test

HINT:

Using the intelligent tester or Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the intelligent tester or Techstream to the DLC3.
2. Turn the ignition switch ON.
3. Turn the tester on.
4. Enter the following menus:
   1. Intelligent tester - Select: DIAGNOSIS / OBD/ MOBD / AIR CONDITIONER / ACTIVE TEST.
   2. Techstream - Select: Body Electrical / Air Conditioner / Active Test.
5. According to the display on the tester, perform the "Active Test".
   1. Intelligent tester

      AIR CONDITIONER 

      AIR CONDITIONER INTELLIGENT TESTER DISPLAY REFERENCE CHART
      
      

      Tester Display	Test Part	Control Range	Diagnostic Note
      DEFOGGER RLY-R	Rear window defogger relay operation	OFF or ON	-

   2. Techstream

      Air Conditioner 

      AIR CONDITIONER TECHSTREAM TESTER DISPLAY REFERENCE CHART
      
      

      Tester Display	Test Part	Control Range	Diagnostic Note
      Defogger Relay (Rear)	Rear window defogger relay operation	OFF or ON	-