LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma X-Runner >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1GR-FE) >> Camshaft Timing Oil Control Valve Assembly >> Inspection

Camshaft Timing Oil Control Valve Assembly: Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        STANDARD REFERENCE

        Tester Connection Specified Condition
        1 (+B) - 2 (GND) 6.9 to 7.9 Ω at 20°C (68°F)

        If the result is not as specified, replace the camshaft timing oil control valve.

        Fig 1: Measuring Resistance Between Terminals
        G04968631Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the operation.
      1. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, and check that the valve operates.
        NOTE: Check that the spool valve is not stuck.

        HINT:

        The spool valve may not return if foreign objects are caught in it. This may cause subtle pressure leakage to the advance side, and a DTC may, be set.

        Fig 2: Checking Valve Operates
        G05198002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals