LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma X-Runner >> Repair and Diagnosis >> Engine Performance >> Engine Control System (1GR-FE) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
    2. Remove the 2 bolts, then remove the accelerator pedal.
      Fig 1: Removing Accelerator Pedal Rod Assembly
      G05198037Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals