On-Vehicle Inspection

INSPECT ACCELERATOR PEDAL ROD

Check the voltage.

Turn the ignition switch to ON.
Turn the intelligent tester ON.
Start the engine and warm it up.
Select the following menu items: DIAGNOSIS / ENHANCED OBD II / DATA LIST / ALL / ACCEL POS #1, ACCEL POS #2.

Operate the accelerator pedal, then check that the ACCEL POS #1 and ACCEL POS #2 values are within the specifications.

Fig 1: Connecting Intelligent Tester (With CAN VIM) To DLC3

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard:

ACCELE POS #1

Accelerator Pedal Condition	Specified Condition
Released	0.5 to 1.1V
Depressed	2.5 to 4.5 V

ACCELE POS #2

Accelerator Pedal Condition	Specified Condition
Released	1.2 to 2.0 V
Depressed	3.4 to 5.0 V

If the result is not as specified, check the accelerator pedal rod, wire harness and ECM.