Service Data
1GR-FE STARTING SERVICE DATA
| Starter | No-load characteristics | Current | 100 A or less at 11.5 V | |
| Starter armature assembly | Circle runout | Maximum | 0.05 mm (0.0020 in.) | |
| Commutator diameter | Standard | 35.0 mm (1.378 in.) | ||
| Minimum | 34.0 mm (1.339 in.) | |||
| Undercut depth | Standard | 0.7 mm (0.028 in.) | ||
| Minimum | 0.2 mm (0.008 in.) | |||
| Starter yoke | Shunt coil resistance | at 20°C (68°F) | 1.5 to 1.9 | |
| Brush | Brush length | Standard | 15.0 mm (0.591 in. | |
| Minimum | 9.0 mm (0.354 in.) | |||
| Starter brush holder assembly | Brush spring load | Standard | 21.5 to 27.5 N (2.2 to 2.8 kgf, 4.8 to 6.2 lbf) | |
| Minimum | 12.7 N (1.3 kgf, 2.9 lbf) | |||
| Starter relay assembly | Resistance (3 - 5) | Apply battery voltage to terminal 1 and 2 | 10 k or higher | |
| Below 1 | ||||
| Ignition or starter switch | Standard | 10 k or higher | ||
| LOCK | 1 (AM1) - 3 (ACC) | Below 1 | ||
| ACC | 1 (AM1) - 3 (ACC) - 4 (IG1) | Below 1 | ||
| ON | 7 (IG2) - 8 (AM2) | Below 1 | ||
| START | 1 (AM1) - 2 (ST1) - 4 (IG1) | Below 1 | ||
| 6 (ST2) - 7 (IG2) - 8 (AM2) | Below 1 | |||