LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System (1GR-FE)) >> Mass Air Flow Meter >> Removal

Mass Air Flow Meter: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE V-BANK COVER  (See REMOVAL  )
  3. REMOVE MASS AIR FLOW METER 
    1. Disconnect the connector.
    2. Remove the 2 screws, then remove the mass air flow meter.
      Fig 1: Removing Mass Air Flow Meter
      G05197997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals