LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE CAMSHAFT POSITION SENSOR 
    1. Disconnect the camshaft position sensor connector.
    2. Remove the bolt, then remove the camshaft position sensor.
      Fig 1: Installing Camshaft Position Sensor With Bolt
      G05198393Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals