Camshaft Position Sensor: Installation

1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
   Fig 1: Applying Light Coat Of Engine Oil To O-Ring Of Camshaft Position Sensor

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. Install the camshaft position sensor with the bolt.

   Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   NOTE: Make sure that the O-ring is not cracked or jammed when installing.
3. Connect the camshaft position sensor connector.

Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf) 

Fig 2: Installing Camshaft Position Sensor With Bolt

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.