LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
    2. Remove the 2 bolts, then remove the accelerator pedal.
      Fig 1: Installing Accelerator Pedal Rod Assembly
      G05198037Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals