LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma PreRunner, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2TR-FE) >> Accelerator Pedal >> Inspection

Accelerator Pedal: Inspection

  1. INSPECT ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard 

        STANDARD REFERENCE CHART

        Tester Connection Specified Condition
        5 (EP1) - 4 (VCP1) 1M Ω or higher
        2 (EP2) -1 (VCP2) 1M Ω or higher

        If the result is not as specified, replace the accelerator pedal.

        Fig 1: Inspecting Accelerator Pedal Rod Assembly
        G05198453Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals