LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma Base, 4D Pickup, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Control System (2TR-FE)) >> Accelerator Pedal >> Removal

Accelerator Pedal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY 
    1. Disconnect the accelerator position sensor connector.
    2. Remove the 2 bolts, then remove the accelerator pedal.
      Fig 1: Installing Accelerator Pedal Rod Assembly
      G05198037Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals