Clutch Switch: Installation

INSTALL CLUTCH SWITCH ASSEMBLY
1. Install the clutch switch assembly and tighten the nut.
2. Connect the connector.
  
  Fig 1: Installing Clutch Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL DRIVER SIDE JUNCTION BLOCK
1. Install the driver side junction block assembly with the 2 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Install the bracket with the 2 bolts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (See INSTALLATION )
CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (See REASSEMBLY )

Fig 2: Installing Driver Side Junction Block Assembly With Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) (See INSTALLATION )
INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab) (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD LH (for Access Cab) (See INSTALLATION )
INSTALL COWL SIDE TRIM BOARD LH (for Double Cab) (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab) (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) (See INSTALLATION )
INSTALL FRONT FLOOR FOOTREST (See FRONT FLOOR FOOTREST )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)