LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2007 >> Tacoma Base, 2D Pickup, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System (1GR-FE)) >> Mass Air Flow Meter >> Inspection

Mass Air Flow Meter: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT MASS AIR FLOW METER 
    1. Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.

      OK: 

      There is no foreign material. 

      If the result is not as specified, replace the mass air flow meter.

    2. Fig 1: Inspecting Mass Air Flow Meter
      G05197998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002